From the appearance, left-hand and right-hand anchor bolts have different thread rotation directions. Left-hand threaded anchor bolts rotate to the left, while right-hand threaded anchor bolts rotate to the right. This difference may seem minor, but it has different effects in practical applications.
In terms of anchoring force, left-handed anchors have relatively large anchoring force, which can better resist the deformation and displacement of the soil and rock. In some mine roadways with complex geological conditions and poor rock and soil stability, left-hand bolts can play a better supporting role. While right-hand anchor bolts have relatively low anchoring force, they can still meet basic support requirements in some projects where the anchoring force requirement is not particularly high.
Ease of installation: Right-hand anchor bolts are easier to install with some conventional installation equipment, and the installation speed is relatively fast. While left-hand threaded anchors may require specific installation tools and techniques, they offer better stability once installed.
The choice between left-hand and right-hand threaded anchors depends on factors such as the geological conditions and support requirements of the specific project. If the geological conditions are complex and the anchoring force requirement is high, a left-handed anchor bolt can be selected; if the installation speed requirement is high and the anchoring force requirement is relatively low, a right-handed anchor bolt is a good choice.

Upon discovering rust, immediately notify the carrier/shipping company, insurance company, freight forwarder, and supplier in writing (email is best).
Take comprehensive photos and videos of the rusted goods, including: the original condition of the container/ship hold when opened, close-ups of the rusted areas, cargo labels/marks, packaging condition, etc. Determine liability at which stage the rust occurred.
Based on the liability determination, decide whether to file a claim with the supplier, shipping company, or the insurance company.

The situation can be avoided later
Before loading the goods, commission a third-party inspection agency to inspect and record the surface condition of the steel.
If any defects are found in the goods before loading, require the carrier to make accurate annotations on the mate's receipt and bill of lading.
Clearly stipulate in the purchase contract: rust acceptance standards (such as allowable rust level and area ratio), quality objection period, claim process, etc.

Coastal areas have high humidity and salt content, making steel space frames prone to corrosion, which affects the structure's service life and safety.
Selecting Corrosion-Resistant Materials: In coastal areas, it is recommended to use steel with excellent corrosion resistance. Weathering steel exhibits good corrosion resistance in atmospheric environments.
Anti-Corrosion Coating: Use a high-performance anti-corrosion coating, such as a three-layer anti-corrosion system of epoxy zinc-rich primer + epoxy micaceous iron oxide intermediate paint + polyurethane topcoat. The coating thickness should be selected according to environmental conditions; generally, a total thickness ≥200 µm is recommended.
Catholic Protection: Install a cathodic protection system in the space frame structure, such as a sacrificial anode or impressed current cathodic protection system, to further improve the structure's corrosion resistance.

In coastal environments, steel structures corrode extremely rapidly, thus requiring very specific corrosion protection measures. This is mainly reflected in the need for more stringent corrosion protection design levels, thicker coating systems, and more stringent construction and acceptance standards.

Environmental Classification: Accurately determine the C5 or CX level according to ISO 12944.
System Selection: Select a heavy-duty anti-corrosion coating system with a total dry film thickness of at least 280μm.
Reinforcement of Critical Components: For ultra-long service life or underwater structures, employ composite measures such as thermal spraying of metal or cathodic protection.
Strict Construction and Acceptance Control: Strictly adhere to Sa 2.5 grade surface treatment and coating quality testing.

The final solution must be determined comprehensively based on factors such as the specific structural type, design life, and construction conditions.